EMD SD60 / GMDD SD60F | ||
|---|---|---|
 | ||
| Data Sheet Information Compiled by: Jean-Denis Bachand | ||
| New: 21 Aug. 2016 | Artwork by: Jean-Denis Bachand | |
| - | ||
| Engine Builder: EMD | Engine: 710G 16 cylinder | |
| Bore & Stroke | 9.02" X 10" | |
| RPM (Maximum / Minimum) | 904 / 318 | |
| Main Generator: AR11A | Horsepower: 3800 | |
| Gear Ratio: 77:17 | Speed: 70 mph | |
| Trucks: HTC 6-Wheel | Configuration: C-C | |
| Traction Motor Blowers: Electrical Drive (4) | Model: Delco | |
| Weight: 368,000 lbs | Traction Motors: Six D87B | |
| Tractive Effort (starting) 98,250 lbs @25% | Tractive Effort (continuous): 100,000 lbs @ 9.8 mph | |
| Multiple Unit Capability: Yes | Dynamic Braking: Yes | |
| Auxilary Generator: Delco A8102 | Alternator: GMD18 | |
| Air Brake: Westinghouse | Model: 26L | |
| Compressor: Gardner-Denver | Model: WBO | |
| Quantity Built: 369 (includes 4 CN SD60F) | Dates: 5/1984 to 9/1995 | |
| - | ||
| Exterior Dimensions | SD50 | |
| Total Length | 71'-02" | |
| Wheel Diameter | 40" | |
| Truck Wheel Base | 13'-07" | |
| Height to Top Engine Hood | 14'-07.5" | |
| Height to Top Cab | 15'-07.5" | |
| Cab Width | 10'-03" | |
| Top of Walkway | 9'-04.5" | |
| Walkway Width | 3'-08.5" | |
| Engine Hood Width | 10'-00" | |
| Center Bolster | 45'-10" | |
| Center Front Truck to Front Pilot | 2'-03" | |
| Center Rear Truck to Rear Pilot | 2'-03" | |
| Distance between Truck Centers | 59'-05.5" | |
| Minimum Turning Radious | 29 degrees | |
| - | - | |
| Fuel Oil: 4400 | Lubricating Oil: 283 | |
| Engine Cooling Water: 250 | Sand Capacity: 56 cu. ft. | |
| Options: | ||
| - | ||
 | ||
| Artwork by Jean-Denis Bachand | ||
|
We thank the following contributors for additions and corrections: Timothy Bryan.
Reference Sources:
| ||